 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ALUMINUM ELECTROLYTIC CAPACITORS ZD 3.0mmL Chip Type series Chip type with 3.0mmL height. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Adapted to the RoHS directive (2002/95/EC). ZR Smaller ZD Specifications Item Category Temperature Range Rated Voltage Range Performance Characteristics - 40 ~ +85C 4 ~ 25V 20% at 120Hz, 20C After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (A) , whichever is greater. Rated voltage (V) tan (MAX.) Rated voltage (V) Rated Capacitance Range 2.2 ~ 100F Capacitance Tolerance Leakage Current tan 4 0.50 4 7 15 6.3 0.40 6.3 4 8 10 0.30 10 3 8 16 0.24 16 2 4 25 0.19 25 2 4 120Hz 20C 120Hz Stability at Low Temperature Impedance ratio Z-25C / Z+20C ZT / Z20 (MAX.) Z-40C / Z+20C Endurance After 1000 hours' application of rated voltage at 85C, capacitors meet the characteristic requirements listed at right. Capacitance change tan Leakage current Within 30% of initial value 300% or less of initial specified value Initial specified value or less Shelf Life After storing the capacitors under no load at 85C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250C for 30 seconds. After removing from the hot plate and restored at room temperature, they meet the characteristic requirements listed at right. Black print on the case top. Capacitance change tan Leakage current Resistance to soldering heat Marking Within 10% of initial value Initial specified value or less Initial specified value or less Chip Type Positive 0.5 MAX. Voltage (C : 16V) Lot No. Series Plastic platform 0.3 MAX. Type numbering system (Example : 16V 10F) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 C0.2 U Z D 1 C 1 0 0 MC L 1 GB A0.2 Taping code X2 10C ZD D0.5 Capacitance 3.0 +0.2 -0.1 0.5 ~ 0.8 Negative Voltage V Code 4 g 6.3 j 10 A 16 C 25 E D A B C E 4 1.8 4.3 4.3 1.0 5 2.1 5.3 5.3 1.3 (mm) 6.3 2.4 6.6 6.6 2.2 B0.2 Configuration Capacitance tolerance (20%) Rated Capacitance (10F) Rated voltage (16V) Series name Type E Dimensions V Cap. (F) Code 4 0G 6.3 0J A0.2 10 1A 16 1C 4 4 4 5 5 6.3 25 1E 7 11 16 18 20 27 2.2 3.3 4.7 5.6 6.8 10 22 33 47 100 2R2 3R3 4R7 5R6 6R8 100 220 330 470 101 4 5 5 6.3 20 28 33 56 5 5 6.3 6.3 28 37 45 70 5 6.3 33 41 5 6.3 23 37 Case size D (mm) Rated ripple Rated Ripple (mArms) at 85C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size are given in page 25. Please contact us for the soldering by reflow. Please refer to page 3 for the minimum order quantity. CAT.8100V |
Price & Availability of UZD1E100MCL
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |